Service Status Response Fields

Upon a successful valve disconnect command, the workflow provides the following response fields:

Response Field	Description
Endpoint ID	The meter's device identification number.
Endpoint Type	The meter model (either Intelis Gas Meter or Gen5 Intelis Gas Meter).
Programmed Valve Status	The current state of the meter's valve: Valve closed. The valve is closed and gas flow is stopped. Valve open. The valve is open and gas is flowing. Armed. The valve is primed to open when the meter's hardware button is pressed.
Magnetic Tamper	The meter's magnetic tamper value, which increments whenever the module is exposed to a strong external magnetic field. Exposure to a magnetic field can result in under-reported consumption or cause the meter to stop counting. This value does not automatically reset when the meter is programmed.
Non Metrology Counter	The number of times the meter received a non-metrology programming value.
Battery Status	The state of the meter's battery's electrical charge. Good. The battery's charge is at greater than 10 percent of capacity. Low. The battery's charge is at 10 percent or less of capacity.
Valve Actuation Life Status	Indicates whether the meter has exceeded its maximum allowable number of operations. An operation is counted for both valve open and valve closure operations. OK. The meter has not exceeded the maximum allowable number of operations. Nearing Max Value. The number of operations is within 10 percent of its allowable maximum. Unknown. The number of operations is not known.
Last Command	The most recent command performed on the meter.
Last Command Status	The current status of the valve as a result of the last performed command: Disconnected Valve Armed